Mastercam Post 换刀前插入行号
包含以下代码，后处理下载地址：http://attao.blog.163.com/blog/static/205398212201210313339485/
strgoto_N : 10 #参数初始化N10
fmt"N" 4strgoto_n #定义strgoto_n数据类型
paddgotoN #定义paddgotoN结构类型
*strgoto_N,e$
strgoto_N = strgoto_N + 10 #N增量，
#在Psof中插入行号paddgotoN
psof$ #Start of file for non-zero tool number
ptravel
pwritbuf5
pcuttype
toolchng = one
if ntools$ = one,
[
#skip single tool outputs, stagetool must be on
#stagetool = m_one
!next_tool$
]
tooltotal = rbuf(4,0)#Reads total tool and null tool changes
if toolcountn <= tooltotal, nexttool = rbuf(4,toolcountn)
else, nexttool = first_tool$
if tool_table = 2, ppredstck,e$
if tool_table = 3, pmetastck,e$
spaces$=sav_spc
paddgotoN #-------插入paddgotoN结构
if plane$ < 0, plane$ = 0
pbld, n$, *sgcode, *sgplane, *smetric, "G40", "G49", "G80", *sgabsinc, e$,
sav_absinc = absinc$
if wcstype <= one, #Work coordinate system
[
absinc$ = one
pfbld, n$, sgabsinc, "G28", "Z0.", e$
pfbld, n$, "G28", "X0.", "Y0.", e$
pfbld, n$, "G92", *xh$, *yh$, *zh$, e$
absinc$ = sav_absinc
]
sav_mi9 = mi9$
sav_workofs = workofs$
if sav_workofs < 0, sav_workofs = 0
ptlchg_com
sof = 0
#在ptlchg中插入行号paddgotoN
ptlchg$ #Tool change
pcuttype
toolchng = one
toolcount = toolcount + 1
if toolcountn <= tooltotal, nexttool = rbuf(4,toolcountn)
else, nexttool = first_tool$
if wcstype = one, #Work coordinate system
[
pfbld, n$, "G28", "X0.", "Y0.", e$
pfbld, n$, "G92", *xh$, *yh$, *zh$, e$
]
pbld, n$, *sm01, e$
paddgotoN #-------------插入paddgotoN结构
pbld, n$, *sgcode, *sgplane, *smetric, "G40", "G49", "G80", *sgabsinc, e$
if mi10$=one, n$, *sm00, e$
ptlchg_com 真是好资料，非常感谢！ 学习一下，能够在切削液指令前加“/”更好 真是好资料，非常感谢！
页:
[1]